| Technical Specifications | ||
| Soluscope | with prefiltration mounted on trolley | |
| Dimensions: Depth Width Height (lid closed) Height (lid open) |
630mm 630mm 360mm 930mm |
Overall
Dimensions: 700mm 700mm 1060mm 1630mm |
Material: |
Polyester |
Zinc Annealed / Acid Alkali resistant coating |
Water Consumption: |
40 litres per cycle |
|
Electrical Consumption: |
0.3kw incoming water at 40°C |
|
Capacity: |
1 endoscope (gastroscope, colonoscope, duodenoscope, echoendoscope or 2 broncho/cystoscopes per cycle). |
|
Water Supply: |
Hot Water (pressure min 250kpa max 250kpa) Cold Water (pressure min 250kpa max 450kpa). |
|
Drain: |
50mm diameter waste |
|
Electrical Supply: |
1 x 240 Volt 15 amps 1 x 240 Volt 10 amps |
|
Noise level: |
40dB |
|
8 Different Cycles are available.
| CYCLE
1 Standard between patients |
CYCLE
2 Last Endoscopes of the Day with Alcohol Drying |
CYCLE
3 Intense Cycle Bronchoscopes Duodenoscopes |
CYCLE
4 Start of Day |
CYCLE
5 Drying with Alcohol only |
CYCLE
6 WEEK-END Self Sterilisation/ Disinfection with Soluscope C |
CYCLE
7 End of day Self Sterilisation/ Disinfection with Soluscope C |
CYCLE
8 Descaling with Soluscope S |
Control Cleaning Disinfection Rinsing Drying Printing 15 minutes |
Control Cleaning Disinfection Rinsing Alcohol injection Drying Printing 18 minutes |
Control Cleaning Disinfection double dose Rinsing Drying Printing 17 minutes |
Control Disinfection Rinsing Drying Printing 11 minutes |
Air Drying Alcohol Inject Drying 3 minutes |
Soluscope
sterilizes/disinfects and drains, disinfectant remains in tubing and
side filter Before using Soluscope again, Press ENTER Printing > 25 minutes |
Same
as cycle 6 does final rinse at preprogrammed time -e.g 0600HRS. If Soluscope is needed prior to this, PRESS the +/- key for 3 seconds prior to starting a new cycle. Printing > 25 minutes |
Descaling 30 minutes |
|
v23.1 |
|||||||
Download This Page (Page7.pdf, 49kb)